Remove front panel of machine unplug power cord, undo hose clamps, take off hoses, unplug supply wire plug from main motor, remove plastic cover, loosen only rear screws of mounting bracket, remove front screwremove assembly from machine, turn over and remove base plate and fit new pump to base plate making sure that pump outlet and plug is to rear of machine - this can be changed by twisting white section and repositioning then assemble in revers order.
Simple really. 1. Turn off power and unplug from wall. 2. Remove 2 screws from bottom of front panel to expose insides. 3. Unscrew pad retaining bolt (8mm) remove old pad fit new pad fit new retaining bolt. 4. Repeat step 3 for second pad. 5. Repeat step 3 for third pad. 6. Refit front panel and install the 2 screws. 7. Youre done.
Very easy to remove the old part and then install the new part. Just need to pay attention to the orientation of the pump outlet relative to the electrical connection to ensure the connection is covered by the plastic protector. The pump housing may need to be rotated to achieve this