|
|
0 items
Add part to cart
to view shipping estimate |
|
|
|
|
|
|
Customers Reported..
29% Inner shower screen was split...
| |
| John , (VIC HUNTLY) |
| Repair Time: 15min |
| Difficulty: Medium |
| Parts Used |
| 1777111 |
|
 |
| Comments: |
Undo holding screw, remove outer and inner screen, replace inner screen and then insert outer screen and screw.
|
| Tools Required: |
Allen key
|
| |
|
| |
| Ian , (QLD NEWPORT) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Only undoing one (1) screw released the damaged component...Likewise reassembling.
|
| Tools Required: |
Phillips screwdriver...
|
| |
|
| |
| Paul , (VIC ROWVILLE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Easy to fit - undo allen key screw, replace inner screen and refit
|
| Tools Required: |
Allen key
|
| |
|
| |
| Peter , (NSW NEWCASTLE EAST) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Undo with an allen key
|
| Tools Required: |
Allen key
|
| |
|
| |
| Steven , (VIC JUNORTOUN) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Self explanatory.
|
| Tools Required: |
Allen key.
|
| |
|
| |
| Damian , (VIC BROADFORD) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
If your filter basket remains in the machine after you remove the group, your inner shower screen is split. Dont dispose of such a good machine for such a small cost of repair.
|
| Tools Required: |
The supplied allen key
|
| |
|
| |
| Ghin , (Sarawak Miri) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| 1777112 |
|
 |
| 1777106 |
|
 |
| Comments: |
Unscrew the outer shower screen using allen key provided to remove the inner shower screen. Replace old screen and screw both new inner screen and outer one back.
|
| Tools Required: |
Allen key
|
| |
|
| |
| Jo , (NSW MALABAR) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1675617 |
|
 |
| 1777111 |
|
|
| Comments: |
Breville explained. Remove shower screen and broken inner shower screen. Replace and put back shower screen using the breville allan key
|
| Tools Required: |
Those supplied by breville
|
| |
|
| |
| George , (VIC MONTMORENCY) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1650303 |
|
 |
| 1777111 |
|
|
| Comments: |
Unscrew remove and replace.
|
| Tools Required: |
Allen key supplied with machine
|
| |
|
| |
| Melanie , (NSW MAITLAND) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
You unscrew the screw that holds in the outer screen and lower it out and the inner screen sits on top of it.
|
| Tools Required: |
The allen key that is supplied with the coffee machine
|
| |
|
| |
| bob , (NSW CAVES BEACH) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| 1777117 |
|
 |
| Comments: |
Unscrew, remove, replace, re-screw, reinstall water reservoir and bean storage bin.
|
| Tools Required: |
Allen key
|
| |
|
| |
| Stephen , (VIC CARNEGIE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew, remove, replace and tighten screw.
|
| Tools Required: |
Allen key (supplied with the machine)
|
| |
|
| |
| Kathy , (North Island Wanganui) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew with alum key and replace damaged part.
|
| Tools Required: |
Alum key
|
| |
|
| |
| Clint , (WA KALGOORLIE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Remove shower screen by taking hex head screw out in the middle of group head, also check auto tamp height to see if thats why shower screen has cracked.
|
| Tools Required: |
Allen key comes with machine.
|
| |
|
| |
| Albert , (VIC BRIGHTON EAST) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew with hex key, clean and replace
|
| Tools Required: |
Hex key
|
| |
|
| |
| ROBERT , (NSW MOSMAN) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Undo shower screen, replace and screw back on
|
| Tools Required: |
Using tool supplied by Breville.
|
| |
|
| |
| Oliver , (NSW ABERGLASSLYN) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Remove the shower screen using the an allen key and replace the inner shower screen. Replace the bolt
|
| Tools Required: |
Allen key
|
| |
|
| |
| Daniel , (AZ - Arizona TUCSON) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| 1777106 |
|
|
| 1777112 |
|
|
| 1777110 |
|
 |
| Comments: |
Use a small mirror to remove allen screw. Note how pieces fit together. Replace faulty-broken -screen and reassemble.
|
| Tools Required: |
Allen wrench
|
| |
|
| |
| Grant , (NSW KELLYVILLE) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Parts will only go in one way, make sure you take note of how the part came out or you may crack the part reinstalling it if done incorrectly. Do not over tighten the allen bolt or you can crack the inner screen or damage the allen bolt or the machine. Give the outer screen a wash and clean while its dissembled.
|
| Tools Required: |
Allen key and cleaning cloth
|
| |
|
| |
| Lucille , (SA TUMBY BAY) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Remove power plug from wall socket. Remove water reservoir and tape up coffee grinder. Tip machine on its back and using an allan key undo the metal sieve and shower spray. Remove the silicon seal and clean all parts. Replace broken shower screen ensuring the concave centre is facing toward the metal screen. Tighten to hand tight as much as possible but not so much as to break the new shower screen.
|
| Tools Required: |
Allan keys
|
| |
|
| |
| Gareth , (VIC MOUNT MARTHA) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Easy with allen key
|
| Tools Required: |
Allen key
|
| |
|
| |
| Craig , (Victoria Rhyll) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| 1777106 |
|
|
| 1777110 |
|
|
| 1777112 |
|
|
| Comments: |
Very easy. Unbolt old screens and bolt in new ones.
|
| Tools Required: |
4mm allen key.
|
| |
|
| |
| Ian , (NSW FISHING POINT) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Remove screen and fit new inner screen.
|
| Tools Required: |
Allan key
|
| |
|
| |
| Brad , (NSW Mona Vale) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Undid the screw holding the metal screen and dropped out the inner showers screen. Easy replace back into the saddle.
|
| Tools Required: |
Allan key
|
| |
|
| |
| Dave , (South Australia Andrews Farm) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew allen key bolt out of outer shower screen and pull out using a small flat screwdriver to pry. Once out clean group head and screw inner and outer screens back in with allen key.
|
| Tools Required: |
1 allen key
|
| |
|
| |
| Peter , (NSW GLENMORE PARK) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777106 |
|
|
| 1777111 |
|
|
| Comments: |
Use the allen (hex) key provided with your machine to remove the screw at the centre of the shower screens. Take note of the way the screens are installed. The screens may need some gentle persuasion the be separated from the machine. Once removed give the area a wipe down then hold the new shower screens in place in the same orientation as the originals and screw in the screw.
|
| Tools Required: |
The allen (hex) key as provided with the machine. A small flat screwdriver to gently pry the screens if required.
|
| |
|
| |
| Tony , (NSW SYLVANIA WATERS) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Simple hex screw
|
| Tools Required: |
Hex driver standard with machine
|
| |
|
| |
| Ian , (NSW ADAMSTOWN HEIGHTS) |
| Repair Time: 15min |
| Difficulty: Medium |
| Parts Used |
| 1777117 |
|
|
| Comments: |
I thought initially the spring had worn causing the filter cup to get stuck in the group head. The problem was caused by the inner shower screen being cracked. Via a later order I replaced the inner shower screen plus purchased a spare and a new silicon group head washer.
|
| Tools Required: |
The correct size allen key to fit the screw in the centre of the inner and outer shower screens in order to remove the screens
|
| |
|
| |
| Jeremy , (TAS RIVERSIDE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Broken shower head easy to replace using coffee machine allen key. Removed stainless screen and replaced shower screen inner.
|
| Tools Required: |
Coffee machine allen key.
|
| |
|
| |
| ANTHONY , (VICTORIA CLIFTON SPRINGS) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Take out screw using allen key and fit new part
|
| Tools Required: |
Allan key
|
| |
|
| |
| Todd , (Western Australia Mount Lawley) |
| Repair Time: 30min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| 1777106 |
|
|
| Comments: |
If the coffee machine is dispensing water unevenly when making coffee it may mean the inner plastic shower screen has split. If you do need to change this then always best to replace the silicone seal also. Simply use an allen key to unscrew the screen under the group head and remove the metal mesh screen (outer shower screen), the inner plastic shower screen and the silicon seal. You will need to remove the drip tray and you may need to tilt back the machine to see properly but I had no issues without doing that. Also the old silicon sealing ring may need some prizing to remove but once loose will come out easily. Then replace all parts making sure the grooves in the silicon ring are facing downwards and that the cup of the shower screen is facing upwards. Do not overtighten or it will cause the screen to split game (again?) over time. When you put the group head back in again to make coffee it should twist to the point where the handle is about 90 or even a little less is okay. If it goes past 90 it probably means you have overtightened the allen key so youll need to loosen it off again a little bit.
|
| Tools Required: |
An allen key
|
| |
|
| |
| Robert , (NSW Medowie) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Refitting of this part was a simple task and the unit works perfectly now. Just ensure not to over tighten the reataining screw as this may stress the inner shower screen and cause it to split.
|
| Tools Required: |
Allen key
|
| |
|
14% Gasket split...
| |
| cobus , (QLD ARMSTRONG BEACH) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
 |
| Comments: |
Been for repair and the steam wand was turning too fast - its just im not happy with the breville - wont buy an other one it just about 6 months old and it keeps breaking down
|
| Tools Required: |
None
|
| |
|
| |
| John , (QLD CAMP HILL) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| 1777106 |
|
|
| Comments: |
Using the allen key that came with the appliance remove the show head and replace with the new part
|
| Tools Required: |
Allen key
|
| |
|
| |
| Jazz , (NSW ROSEVILLE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1650303 |
|
|
| 1777168 |
|
|
| Comments: |
Replace the gasket
|
| Tools Required: |
None
|
| |
|
| |
| Warren , (VIC CHELTENHAM) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| 1777169 |
|
 |
| 1777171 |
|
 |
| Comments: |
- unscrew steamer wand tip - remove old broken gasket - install new gasket - screw wand tip back on
|
| Tools Required: |
No tools required
|
| |
|
| |
| John , (NSW GLENFIELD PARK) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Replaced gasket easy
|
| Tools Required: |
None
|
| |
|
| |
| Anthony , (VIC RUTHERGLEN) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Easy to take apart and add new part
|
| Tools Required: |
None
|
| |
|
| |
| Gideon , (NSW MASCOT) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Undo and replace
|
| Tools Required: |
No tool required
|
| |
|
| |
| Jeanne , (NT DARWIN) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777168 |
|
|
| 1777169 |
|
|
| Comments: |
Easy to remove the metal cap and replace the orange rubber gasket.
|
| Tools Required: |
Your hands )
|
| |
|
| |
| Roslyn , (WA PINJARRA) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1650303 |
|
|
| 1777111 |
|
|
| Comments: |
Easy
|
| Tools Required: |
Little tool that comes with it
|
| |
|
| |
| Ashan , (VIC COLLINGWOOD) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| 1617878 |
|
 |
| Comments: |
Coffee basket was getting stuck after coffee pour on the water, pour head shower screen split into 4, remove shower water filter by removing hex screw, gasket can now be removed, clean, refit new shower screen inner, do not over tighten screw when re fitting . Backwash using breville procedure test.
|
| Tools Required: |
Hex key screw bit and stubby screwdriver for hex bit
|
| |
|
| |
| Gavin , (NSW BOOROOMA) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Unscrew end of steam wand, fit new gasket and red tee end on
|
| Tools Required: |
None
|
| |
|
| |
| Danny , (VIC RUTHERGLEN) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrewed old one and replaced it with new one.
|
| Tools Required: |
Allen key
|
| |
|
| |
| Judy , (SA SEMAPHORE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| 1777171 |
|
|
| Comments: |
Perfect fit
|
| Tools Required: |
None
|
| |
|
| |
| justin , (QLD NOOSA HEADS) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777107 |
|
 |
| Comments: |
Remove top of machine, remove probes and change.
|
| Tools Required: |
Pliers and screwdrivers.
|
| |
|
| |
| Dirk , (Kennewick Washington) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
It just slides on the center pin of the lower steam wand.
|
| Tools Required: |
None. You just replace it as if you were doing the normal maintenance on the steam wand.
|
| |
|
6% Loose part and needed to replace it...
| |
| Mark , (NSW TURRAMURRA) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777204 |
|
 |
| Comments: |
Easy to fit
|
| Tools Required: |
None
|
| |
|
| |
| Susan , (VIC BEACONSFIELD) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Easily replaced the part. Only an alan key needed.
|
| Tools Required: |
Alan key.
|
| |
|
| |
| Bradley , (QLD THORNESIDE) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777099 |
|
 |
| 1902120 |
|
 |
| 1777131 |
|
 |
| Comments: |
Relatively easy fix - allow approx 1 hour. Remove top and back covers of machine by removing fastening screws, loosen white box at lhs rear to allow access to pump, remove pump holding screws, remove inlet-outlet tubes at base of pump and at top of pump, undo electrical press connections, remove pump, install new pump and reconnect all tubes and electrical connections tighten hold down screws remove solenoid valve from top of machine by loosening 4 hold down screws remove rubber gasket at base of solenoid valve (take care to remove the 4 small washers and 2 small flow tubes) remove any build up of crust or residual rubber with scraper andor scourer pad make sure the inletoutlet holes are not blocked with grit install new solenoid valve gasket with new washers and new flow tubes install new solenoid valve and secure with 4 screws add the flow tube. Install the covers to the machine and job done.
|
| Tools Required: |
Tork drive,, phillips head screwdriver, side cutters, 2 zip ties
|
| |
|
| |
| Di , (VIC LEOPOLD) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| 1777171 |
|
|
| Comments: |
Easy to fit
|
| Tools Required: |
No
|
| |
|
| |
| Mark , (VIC SAN REMO) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777164 |
|
 |
| Comments: |
Remove top of machine, disconnect all wiring, remove holding screws to steam arm and replace
|
| Tools Required: |
Long nose pliers, phillips head screwdriver
|
| |
|
| |
| Peter , (NSW THURGOONA) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777117 |
|
|
| Comments: |
Remove current spring and replaced with new spring
|
| Tools Required: |
None
|
| |
|
| |
| Peter , (Connecticut Guilford) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777126 |
|
 |
| Comments: |
Challenging to get to but repair fairly straightforward once you figure out how to get the cover off, google, and front screws hidden under lcd screen panel. Dont leave o-ring on the probes during install, install o-ring in pocket of steam boiler connection or it will be tough to install probe without damaging o-ring. Found this out the hard way. Wires have slide off connectors which is important for longer probes.
|
| Tools Required: |
Phillips 20 torx screwdrivers. Something to push down ceramic probe connector but be careful as they can be damaged pretty easily.
|
| |
|
6% Noisey solenoid valve...
| |
| Allan , (NSW MARYVILLE) |
| Repair Time: 30min |
| Difficulty: Easy |
| Parts Used |
| 1902120 |
|
|
| 1777099 |
|
|
| Comments: |
Followed youtube clip which showed how to replace the valve on a breville bes 380
|
| Tools Required: |
Pliers, phillips screwdriver.
|
| |
|
| |
| Nerio , (VIC IVANHOE EAST) |
| Repair Time: 30min |
| Difficulty: Easy |
| Parts Used |
| 1777099 |
|
|
| Comments: |
Simply remove existing solenoid and replace with new. Watching on youtube
|
| Tools Required: |
Screwdrivers
|
| |
|
| |
| Lyndy , (NSW GORDON) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777086 |
|
 |
| Comments: |
Insert part into machine by hand, clicks easily in place
|
| Tools Required: |
None
|
| |
|
| |
| Ghin , (Sarawak Miri) |
| Repair Time: 30min |
| Difficulty: Medium |
| Parts Used |
| 1617507 |
|
 |
| 2414194 |
|
 |
| 1777154 |
|
 |
| 1777099 |
|
|
| 1650303 |
|
|
| Comments: |
Open up cover from back, remove old solenoid valve and replace with new one
|
| Tools Required: |
Screwdriver and pliers
|
| |
|
| |
| Richard , (ACT KINGSTON) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777099 |
|
|
| Comments: |
Make sure to put a crunched-up paper towel into the feeder tube that runs from the bean holder grinder. If you drop one of the four screws that holds the solenoid down into the 25mm diameter tube youre in big trouble. Using a magnetic tipped phillips head screwdriver will make sure they dont fall into the machine. Easy ways to minimise pain, good luck
|
| Tools Required: |
You do need a driver which is like a hex head but with spikes. I dont know what theyd called - sorry. You need it to get the panel off the back of the unit. Apart from that allen key and philips head screwdriver
|
| |
|
| |
| Nick , (VIC TRARALGON) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777113 |
|
 |
| Comments: |
Follow youtube video. Simply search breville bes920 solenoid valve.
|
| Tools Required: |
Star type screw bit phillips head, needle nose pliers.
|
| |
|
5% Old shower screen blistered...
| |
| Andrew , (NSW BONDI) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew old - screw in new
|
| Tools Required: |
Allen key
|
| |
|
| |
| Jan , (VIC Newborough) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777106 |
|
|
| 1777111 |
|
|
| Comments: |
Using an allen key unscrew the head. Fit together and re screw
|
| Tools Required: |
Allen key
|
| |
|
| |
| John , (VIC RYE) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777106 |
|
|
| Comments: |
Remove head and fit new seal
|
| Tools Required: |
Allen key
|
| |
|
| |
| Patrick , (WA NEDLANDS) |
| Repair Time: 120min |
| Difficulty: Hard |
| Parts Used |
| 1777131 |
|
|
| Comments: |
Bes 900 pump and solenoid replacement youtube
|
| Tools Required: |
Screwdriver, pliers
|
| |
|
| |
| Hafid , (Singapore Singapore) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777206 |
|
 |
| 1777111 |
|
|
| 1777112 |
|
|
| 1777110 |
|
|
| Comments: |
Undo the screw with the provided allen key and replace.
|
| Tools Required: |
Provided allan key
|
| |
|
5% Steam wand causing error on machine due to poor design....
| |
| Elrond , (QLD MOGGILL) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1777171 |
|
|
| 1777168 |
|
|
| 1777164 |
|
|
| 1777169 |
|
|
| Comments: |
Open back and top of the machine, loosened all screws - note they seem to try and use a different screw on every possible place so dont just dump them all into a big pile. Then traced all the wires and as I removed the old wands wire plugged or soldered the new on. Insulated the solder joints with shrink tube removed the old wand and put the new one in. Zip tied all the ones I remove again and closed it up.
|
| Tools Required: |
A few screwdrivers, a torqx bit, wire cutter, soldering iron, shrink tube, pick and zip ties.
|
| |
|
| |
| Danny , (QLD NARANGBA) |
| Repair Time: 200min |
| Difficulty: Medium |
| Parts Used |
| 1777164 |
|
|
| Comments: |
Httpsrobert.Hawdon.Net20190505fixing-the-workplace-coffee-machine
|
| Tools Required: |
Long wand screwdriver for first two screws. Screw next to grinder needs a screwdriver with a skinny grip otherwise it will not turn. security screwdriver set for the top back two screw panel, some string fishing line not to lose the milk frother steam pipe, clip also small pliers - the part comes with an extra steam pipe clip and rubber oring.
|
| |
|
| |
| Andrew , (VIC SELBY) |
| Repair Time: 120min |
| Difficulty: Medium |
| Parts Used |
| 1777164 |
|
|
| Comments: |
Dismantle the casing, unscrew the wand assembly. Replace the wand assembly and the wires. A bit fiddly but better to save 400 and wasting time.
|
| Tools Required: |
Soldering and screwdriver and a hex head size 20
|
| |
|
| |
| Ben , (NSW BEECROFT) |
| Repair Time: 60min |
| Difficulty: Medium |
| Parts Used |
| 1650303 |
|
|
| 2414194 |
|
|
| 1777154 |
|
|
| 1777164 |
|
|
| Comments: |
There are some good tutorial videos on youtube to fit the steam wand (eg. Httpsyoutu.Beqh1hnvunelg)
|
| Tools Required: |
Screwdriver (phillips and torx), side cutters, wire stripppers (optional), zip ties, needle nose pliers.
|
| |
|
| |
| Scott , (VIC CARRUM DOWNS) |
| Repair Time: 30min |
| Difficulty: Medium |
| Parts Used |
| 1777164 |
|
|
| Comments: |
Covers need to come off the machine. Soldering-crimping of wires involved.
|
| Tools Required: |
T25 torx 2 phillips head, soldering iron and solder, heat-shrink tubing
|
| |
|
5% Orange steam wand worn and had used my spare...
| |
| Keith , (NSW LONDONDERRY) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777171 |
|
|
| 1777168 |
|
|
| 1777169 |
|
|
| Comments: |
Unscrew tip of wand
|
| Tools Required: |
Nil
|
| |
|
| |
| Michael , (QLD BROOKWATER) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| 1777171 |
|
|
| 1777169 |
|
|
| Comments: |
Fitment is quite straightforward as sliding on parts.
|
| Tools Required: |
Nil
|
| |
|
| |
| Brian , (VIC COOLAROO) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Screw tip of wand off. Remove old gasket and replace new gasket. Will take approx 30-40 seconds
|
| Tools Required: |
Fingers only
|
| |
|
| |
| Stephen , (Vic Bendigo) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
Unscrew the tip of the steam wand and place the new silicon tip on the end
|
| Tools Required: |
None
|
| |
|
| |
| Laila , (NSW KAREELA) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777168 |
|
|
| Comments: |
It appears that I need to replace these regularly. I am quite surprised as we have the same machine at work which we use more and I have never had to replace this.
|
| Tools Required: |
Nothing - quick replacement
|
| |
|
5% Old shower screen cracked...
| |
| Andrew , (VIC BEAUMARIS) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Unscrew shower screen keeping screw and metal screen. Replace plastic screen, refit metal screen with screw.
|
| Tools Required: |
Use the hex key supplied with the machine.
|
| |
|
| |
| Dean , (Victoria Ballarat) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Search for it on youtube. Simple
|
| Tools Required: |
Allen key
|
| |
|
| |
| Greg , (Victoria Boronia) |
| Repair Time: 30min |
| Difficulty: Easy |
| Parts Used |
| 1777106 |
|
|
| Comments: |
Followed manufacturer instructions using supplied tools. Some good youtube videos out there on it.
|
| Tools Required: |
Supplied tools with machine
|
| |
|
| |
| Rae , (NSW Parkes) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Allen key needed to remove old screen. Empty all water first, lay machine over on its back. You may need a toothpick to remove build up of coffee grinds from around the screw. Then just unscrew and replace. Quick and easy.
|
| Tools Required: |
Allen key
|
| |
|
| |
| Steve , (NSW BATHURST) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777111 |
|
|
| Comments: |
Remove socket head bolt and stainless steel screen from group head. Remove broken shower screen and replace. Reassemble.
|
| Tools Required: |
Allen key.
|
| |
|
3% Appliance leakage - safety valve failure...
| |
| Scott , (SA REDWOOD PARK) |
| Repair Time: 15min |
| Difficulty: Medium |
| Parts Used |
| 1777142 |
|
 |
| Comments: |
The part fails leaving thread inside the pump which requires removal first. So an easy out type tool is useful. The whole device is packed tight so take care not to pinch wires hoses on reassembly. Experienced techs wont have much trouble so medium. But anyone trying to do this it will be v.Hard.
|
| Tools Required: |
Philips torx easyout, pliers for hose clamps, needle pliers.
|
| |
|
| |
| Gayle , (QLD URANGAN) |
| Repair Time: 15min |
| Difficulty: Easy |
| Parts Used |
| 1777142 |
|
|
| Comments: |
View youtube video
|
| Tools Required: |
Phillips head pointy pliers allen key
|
| |
|
| |
| Xyriz , (British Columbia Surrey) |
| Repair Time: 15min |
| Difficulty: Very Easy |
| Parts Used |
| 1777126 |
|
|
| Comments: |
Simply replacing the water level probes and epoxy sealing the other end of the probe to prevent leaks.
|
| Tools Required: |
High temperature epoxy.
|
| |
|
3% Water inlet lid closure clasp broken. lid wouldnt close....
| |
| Sandra , (New Jersey Bridgewater) |
| Repair Time: 30min |
| Difficulty: Easy |
| Parts Used |
| 1777079 |
|
 |
| Comments: |
The only tricky thing was getting the machine lid off... And undoing the screws underneath. Replacing the part itself was straightforward.
|
| Tools Required: |
Phillips head screwdrivers.
|
| |
|
| |
| Andy , (South Australia Moana) |
| Repair Time: 5min |
| Difficulty: Easy |
| Parts Used |
| 1636592 |
|
 |
| 1777077 |
|
 |
| Comments: |
Dig it out and gently press new lock in
|
| Tools Required: |
Something thin. I used a scriber
|
| |
|
| |
| Anthony , (NSW WEST PENNANT HILLS) |
| Repair Time: 5min |
| Difficulty: Very Easy |
| Parts Used |
| 1777077 |
|
|
| Comments: |
Grip with pointy nose pliers and remove broken clip with upward motion. Slide in new part...Very easy.
|
| Tools Required: |
Pointy nose pliers
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Air dehumidifiers
